Canopy Diagram - Parts And Instructions

Building a canopy at home is easier than you think. All of the canopy components found at here at CanopiesAndTarps.com are compatable with your local hardware store's galvanized steel tubing selection. The following guide gives complete instruction on the proper tubing lengths and diameters needed to construct your own canopy at home. In addition, our guide will instruct you on the exact number of fittings and ball bungees needed to complete some of our most popular canopy frames. For further information, feel free to contact our customer service team. 

---

 

10 x 10 Canopy Frame (3/4" or 1" Dia. EMT Conduit)

• 4 - 69" Poles (Peak Rafters)
• 3 - 118" Poles (Length Tubing)
• 4 - 80" Poles (Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 1 - 10' x 12' Tarp Cover
• 30 - Ball Bungee Ties

Back To Canopy Selection

 

10 x 20 Canopy Frame (1-3/8" Dia. Fence Tubing)

• 8 - 69" Poles (Peak Rafters)
• 17 - 80" Poles (Length Tubing & Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 6 - 4-Way High Peak Connectors (Click To View)
• 1 - 12' x 20' Tarp Cover
• 50 - Ball Bungee Ties

Back To Canopy Selection

 

12 x 20 Canopy Frame (1-3/8" Dia. Fence Tubing) 

• 25 - 80" Poles (Peak Rafters, Length Tubing & Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 6 - 4-Way High Peak Connectors (Click To View)
• 1 - 14' x 20' Tarp Cover
• 50 - Ball Bungee Ties

Back To Canopy Selection

 

14 x 20 Canopy Frame (1-3/8" Dia. Fence Tubing)

• 8 - 92" Poles (Peak Rafters)
• 17 - 80" Poles (Length Tubing & Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 6 - 4-Way High Peak Connectors (Click To View)
• 1 - 16' x 20' Tarp Cover
• 50 - Ball Bungee Ties

Back To Canopy Selection

 

18 x 20 Canopy Frame (1-3/8" or 1-5/8" Dia. Fence Tubing)

• 12 - 118" Poles (Peak Rafters & Length Tubing)
• 6 - 80" Poles (Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 3 - 4-Way High Peak Connectors (Click To View)
• 1 - 20' x 20' Tarp Cover
• 60 - Ball Bungee Ties

Back To Canopy Selection

 

18 x 30 Canopy Frame (1-5/8" or 1-7/8" Dia. Fence Tubing)

• 17 - 118" Poles (Peak Rafters & Length Tubing)
• 8 - 80" Poles (Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 6 - 4-Way High Peak Connectors (Click To View)
• 1 - 20' x 30' Tarp Cover
• 70 - Ball Bungee Ties

Back To Canopy Selection

 

18 x 40 Canopy Frame (1-5/8" or 1-7/8" Dia. Fence Tubing)

• 22 - 118" Poles (Peak Rafters & Length Tubing)
• 10 - 80" Poles (Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 9 - 4-Way High Peak Connectors (Click To View)
• 1 - 20' x 40' Tarp Cover
• 80 - Ball Bungee Ties

Back To Canopy Selection

 

30 x 50 Canopy Frame (1-7/8" Dia. Fence Tubing)

• 12 - 14' 5" Poles (Peak Rafters)
• 15 - 9' 10" Poles (Length Tubing)
• 12 - 80" Poles (Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 12 - 4-Way High Peak Connectors (Click To View)
• 26 - 40" Bar Brace Supports (Click To View)
• 1 - 30' x 50' Tarp Cover
• 110 - Ball Bungee Ties

Back To Canopy Selection

 

30 x 60 Canopy Frame (1-7/8" Dia. Fence Tubing)

• 14 - 14' 5" Poles (Peak Rafters)
• 18 - 9' 10" Poles (Length Tubing)
• 14 - 80" Poles (Canopy Legs)
• 6 - 3-Way High Peak Connectors (Click To View)
• 14 - 4-Way High Peak Connectors (Click To View)
• 31 - 40" Bar Brace Supports (Click To View)
• 1 - 30' x 60' Tarp Cover
• 120 - Ball Bungee Ties

Back To Canopy Selection

Installation Steps

1. Place the roof pipes and tubing that makes up the length on the ground with the correct fittings next to them. The 3-way fittings will be installed at the front and back ends of the canopy and the 4-way fittings will be installed at the center connection points.
2. Connect the pipe and fittings. At this point the entire top of the canopy frame will be sitting on the ground in an A-shape formation.
3. Drape the tarp over the top of the frame and secure the corners with the Ball Bungee Ties. It is best to start at one corner and then secure the opposite corners working in an X formation. Attach the Ball Bungee Ties by pulling the elastic band up through the grommet from the underside of the tarp. Once the plastic ball catches on the grommet, wrap the elastic around the tubing until there is tension. Finally, slide the tightened elastic back over the plastic ball.
4. Lift one side of the canopy frame so the structure is tilted. Slide the legs into the underside of the fittings. Once all the legs have been installed on the lifted side you may now go the other side and repeat the process.
5. Now that the canopy frame is complete, double check all Bungee Ties and make adjustments as necessary.

Back To Top Of Page